Products

Crushers & Shredders

Granulators

Pulverizers

Agglomerators

Laboratory Mills

Ultra-Fine Grinding

 

Solutions by

Industry

Chemical

Food

Pharmaceutical

Plastics & Rubber

Mineral

Recycling

Wood

WPC

 

Mills for Laboratory and Pilot Plants

Universal Mill, type PXL & PPXL

Size reduction from coarse to superfine grinding down to minus 20 micron and product hardness up to 3 according to the Mohs scale, such as chemicals, pharmaceuticals, food, annual plants, leaves, roots, minerals etc.

Method of Operation

The size of the in-feed material has to be smaller than 6 mm ("). Typical particle sizes that can be achieved are in the range of 2000 to 100 micron (10 to 170 mesh).

Material is put into a feed hopper. The vibratory feeder is metering the material into the universal mill. Size reduction is performed between stationary and rotating grinding inserts. The particle size of the end product can be adjusted by the speed of the rotor, the mesh size of the screens and the type of grinding inserts chosen. A wide variety of different grinding inserts is available. Materials can be pulverized, fiberized, homogenized and mixed. Product discharge is down to below into a collecting bin. Process air is cleaned in a dust collector.

The PPXL is a counter-rotating mill used for pulverizing greasy, sticky and moist materials under ambient temperature or for cryogenic grinding.

Advantages & Features

bullet

Large access door allows easy access to the grinding chamber. Easy access and easy cleaning

bullet

Machine housing in welded design

bullet

Bearing assembly flanged to the rear wall of the housing. Bearing seals gas flushed

bullet

Wear parts can be exchanged easily

bullet

Safety switches for maximum operator safety

bullet

compact design

bullet

Low operating costs

bullet

Special designs available in Stainless Steel, polished surfaces, x-proof up to 10 bar, and for operation under inert atmosphere and cryogenic grinding

Applications

This universal mill system is designed to pulverize soft to medium hard organic and inorganic materials, such as chemicals, pharmaceuticals, food amd feedstuff, annual plants, leaves, roots, minerals etc.

bullet

Chemicals

bullet

Pharmaceutical products

bullet

Food
bullet

Spices

bullet

Dairy products

bullet

Minerals

bullet

Cellulose

bullet

Wood

Technical Specifications

Type

 

PXL18

PPXL18

Scale-up Factor

f

1.0

1.0

Rotor Diameter

mm

180

180

Motor

kW

7.5

3.0+1.5

Home | About PALLMANN | Products | Solutions by Industry | Parts and Service | Contact Us | Sitemap


Quick Search:

2009 PALLMANN Industries, Inc.
PALLMANN Industries, Inc.
36 Atlantic Way, Clifton, New Jersey 07012 - USA
Phone: (973) 471-1450 - Fax: (973) 471-7152
Email: info@PallmannIndustries.com