Solutions by

Industry

Chemical

Food

Pharmaceutical

Plastics & Rubber

Mineral

Recycling

Wood

WPC

 

Products

Crushers & Shredders

Granulators

Pulverizers

Agglomerators

Laboratory Mills

Ultra-Fine Grinding

 

Impact Hammer Mill Shredder, Type PHPS

Economical preparation of pre-shredded waste wood with PALLMANN’s Impact Hammer Shredder, type PHPS

Adequately prepared waste wood represents a valuable raw material source. The PALLMANN Impact Hammer Shredder, type PHPS converts pre-shredded waste wood of any kind into valuable raw material for reutilization in board production or energy generation. Even contaminated materials can be fed into the shredder. Foreign matter, traveling in the feed stock is separated and automatically discharged.

Method of Operation

The feed material is introduced into the shredder vertically from above. Heavy rotating hammers hit in an upward action against the feed material and throw it against the inside of the housing top above the rotor where it will be pre-broken by impact. The wood pieces are split along the grain, metal contaminants enclosed into the wood are set free in the special feed chute because of their different ballistic curve. The final preparation is effected by stationary breaker and comb bars. The opening of the heavy grid defines the finished product size.

Impact Hammer Shredder, type PHPS

Impact Hammer Shredder, type PHPS with ballistic discharge chute and pneumatic discharge

Advantages & Features

bullet

High throughput capacity at low specific energy consumption

bullet

Foreign matter is removed and separated from the waste wood

bullet

Insensitive against foreign matter

bullet

Easy to maintain

bullet

Easy access to the rotor for maintenance

bullet

Insensitive against feed fluctuations

Technical Specifications

PHPS 8-9 8-12 12-15 16-15 16-18 20-20

Drive capacity

from 110 kW to 700 kW depending on size

Throughput capacity in t/hr

from 4 to 26 depending on size

*Depending on the type of machine, type of wood and wood density

Home | About PALLMANN | Products | Solutions by Industry | Parts and Service | Contact Us | Sitemap


Quick Search:

© 2009 PALLMANN Industries, Inc.
PALLMANN Industries, Inc.
36 Atlantic Way, Clifton, New Jersey 07012 - USA
Phone: (973) 471-1450 - Fax: (973) 471-7152
Email: info@PallmannIndustries.com