Products

Crushers & Shredders

Granulators

PS Series 300
PS Series 400
PS Series 600
PS Series 800-1200
PS Series B
PS Series C
PS Series F
PS Series H
PS Series I
PS Series K
PS Series L
PS Series P
PS Series R
PS Series S
PS Series T
PS Series U
PS Series V
PS Series W
Series PSRH
Series PSC

Pulverizers

Agglomerators

Laboratory Mills

Ultra-Fine Grinding

 

Solutions by

Industry

Chemical

Food

Pharmaceutical

Plastics & Rubber

Mineral

Recycling

Wood

WPC

 

Knife Mill, Type PS-W

Granulating of all Types of Thermoforming Waste into Reusable Granules

Method of Operation

Installation of the granulator is on the production floor. Feeding is done manually or with a belt conveyor. Material is size reduced between rotor- and bed knives. A screen holds material inside the grinding chamber, as long as it is too coarse. Fine material gets discharged through the screen into a pneumatic discharge system.

Advantages & Features

bullet

Reliable, efficient robust design

bullet

An open, alternating slant cut rotor is standard.

bullet

Bearings are outboard and no grease can enter the grinding chamber.

bullet

Rotor knives are adjusted outside the machine.

bullet

Knife gap setting inside the machine is no longer necessary. Two rows of bed knives are adjusted inside the cutting chamber.  

bullet

The 180-screen is symmetrical and can be used from both sides. The standard hole size of the screen is 8 mm ( 5/16").

bullet

The clean cut granules produced are ideal for feeding extruders and injection molding machines.

Applications

Granulating of all types of thermoforming waste into reusable granules. These granulators are used off-line and accept complete skeleton rolls. Other applications for these machines are granulation of tangled sprues and runners in the injection molding industry. The content of complete boxes and containers can be fed without having the need for manual separation.

  • Plastics Materials

    • Thermoforming waste

    • Injection Molding waste

Technical Specifications

Type

PS-W 300-1000 500-1000
Scale-Up Factor   1.0 2.0
Infeed opening mm 1300-1015 1520-1015

Rotor diameter

mm 300 500

Cutting Width

mm 1000 1000

Motor

kW 22 75
Capacity* Kg/h 400-600 800-1100

* Throughput Rate varies depending of the feed material

 

Home | About PALLMANN | Products | Solutions by Industry | Parts and Service | Contact Us | Sitemap


Quick Search:

2009 PALLMANN Industries, Inc.
PALLMANN Industries, Inc.
36 Atlantic Way, Clifton, New Jersey 07012 - USA
Phone: (973) 471-1450 - Fax: (973) 471-7152
Email: info@PallmannIndustries.com