Solutions by

Industry

Chemical

Food

Pharmaceutical

Plastics & Rubber

Mineral

Recycling

Wood

WPC

 

Products

Crushers & Shredders

Granulators

Pulverizers

Agglomerators

Laboratory Mills

Ultra-Fine Grinding

 

Wing Beater Mill Type PSK

Defiberization of paper chips with PALLMANN’s Wing Beater Mill, type PSK

The Wing Beater Mill, type PSK has been specifically developed for the production of knot-free fibers from waste paper chips. The quality paper fibers are then used as reinforcement fibers for mineral bonded board products. Adequately equipped, these wing beater mills can also be used for fiber preparation from annual plants.

Method of Operation

The pre-shredded feed material is sucked via the gravity separator feed chute into the center of the grinding chamber. Magnet cascades mounted in front of the feed chute separate ferrous contaminants from the feed stock. Size reduction is effected between the fast rotating impeller wear plates, the stationary screen ring segments and the stationary refining elements integrated into the screen ring. The screen opening determines the finished product size. Material discharge is done pneumatically.

Wing Beater Mill, type PSK Subsription

Wing Beater Mill, type PSK

Wing Beater Mill, type PSK with lateral product discharge, dosing hopper and discharge system for the defiberization of paper waste

Advantages & Features

bullet

Low operating and wear parts cost

bullet

Easy exchange of screen segments

bullet

Adjustable clearance between rotating impeller and stationary screen ring

bullet

In-feed chute designed as gravity separator

bullet

Easy access to grinding chamber for maintenance works

bullet

Low specific energy consumption

Technical Specifications

PSK 12-450 15-450

Drive capacity rotor

from 37 - 1600 kW 200-250kW
Throughput capacity in to/hr 1.5-1-8 1.8-2-2

*Depending on the type of machine, type of wood and wood density

Home | About PALLMANN | Products | Solutions by Industry | Parts and Service | Contact Us | Sitemap


Quick Search:

© 2009 PALLMANN Industries, Inc.
PALLMANN Industries, Inc.
36 Atlantic Way, Clifton, New Jersey 07012 - USA
Phone: (973) 471-1450 - Fax: (973) 471-7152
Email: info@PallmannIndustries.com