Products

Crushers & Shredders

Granulators

Pulverizers

PKM Pulverizer
PP Turbo Mill
REF Turbo Mill
PST & PPST Pin Mill
PX Universal Mill
- PXL & PPXL
PSKM Double Stream Mills
PPS & PPSR Contra-Selector Mill
PLM Turbofiner
PHM Hammer Mills
PLK ConoMillTM
Cryogenic Grinding

Agglomerators

Laboratory Mills

Ultra-Fine Grinding

 

Solutions by

Industry

Chemical

Food

Pharmaceutical

Plastics & Rubber

Mineral

Recycling

Wood

WPC

 

Universal Mill, type PX

Production of medium to fine powders from soft to medium hard materials with a maximum Mohs hardness of up to 3

Method of Operation

Material is gravity fed into the center of a grinding chamber and size reduced by impact, which takes place between the interchangeable grinding elements of a rotor and a stator arrangement. Pulverized material is discharged vertical through the bottom outlet of the machine.

The design of the mill is very user friendly. The stationary grinding elements are mounted on a large door, which swings to the side for easy access to the interior of the machine for clean down purposes inspection or maintenance work. Wear parts can be exchanged very easily. The door is closed with a swing bolt. A safety door locking system is standard for maximum operator protection.

Powders with a particle sizes of d97=45-500 m (325-35 mesh) can be produced with this mill. Different grinding components are available to adapt to the different material to be pulverized.

See also Universal Mill, type PXL and PPXL

PX - Pin disc set PX - Turbo Impeller PX - Beater Mill

Advantages & Features

bullet

Large access door allows easy access to the grinding chamber. Easy access and easy cleaning

bullet

Machine housing in welded design

bullet

Bearing assembly flanged to the rear wall of the housing. Bearing seals gas flushed

bullet

Wear parts can be exchanged easily

bullet

Safety switches for maximum operator safety

bullet

compact design

bullet

Low operating costs

bullet

Special designs available in Stainless Steel, polished surfaces, x-proof up to 10 bar, and for operation under inert atmosphere and cryogenic grinding

Applications

Excellent for pulverizing medium hard to soft materials

bullet

Chemicals

bullet

Pharmaceutical products

bullet

Food
bullet

Spices

bullet

Dairy products

bullet

Minerals

bullet

Cellulose

bullet

Wood

Technical Specifications

Type

PX

315

500

630

1000

Scale-up Factor

f

1.0

2.4 4.0 8.6

Rotor Diameter

mm

315

500 630 1000

Motor

kW

18.5

45 75 160

Home | About PALLMANN | Products | Solutions by Industry | Parts and Service | Contact Us | Sitemap


Quick Search:

2009 PALLMANN Industries, Inc.
PALLMANN Industries, Inc.
36 Atlantic Way, Clifton, New Jersey 07012 - USA
Phone: (973) 471-1450 - Fax: (973) 471-7152
Email: info@PallmannIndustries.com